Insertion Paddle Wheel type Flow Totalizer with PP Sensor & SS Stub End fitting - series 282

Digital flow rate Indicator with Totalizer with Relay/Batcher/Pulser (Models : P-282 & F-282)

• Type of sensor : Insertion Paddle Wheel type Flow Rate Indicator with Totalizer
• Max. % of Solids: 1 % of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length
• Mounting  : Field or, Panel
• Pipe Line size  : min. 15 mm up to 500 mm
• Pressure drop Less than 0.1 bar
• Pulses     : 4 Pulses each rotation
• Accuracy    : +/- 1% of Full Scale if velocity is more than 0.5 m/s
• Repeatability   : +/- 0.5%
• Enclosure : Weather proof IP 65
• Gland  : PO7
• Fitting materi : ABS, SS304 or, SS316
• Fitting Type     : Threaded, Flanged, Weld on Adaptor
• Flow Ranges : min. from 4.33 to 58000 LPM
• Max. Operating Temperature: 60 C for PP Sensor with ABS fittings & 100C for SS Sensor with SS Fitting
• Sensor Cable Length : 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter                             
• Paddle  : PVDF (Magnetic up to 100C & Non Magnetic up to 80C)
• Indicator Housing : Polycarbonate
• O-rings/Pin   : Viton/Hastealloy C
• Sensor Rod  : PP or, SS316
• Max. Working Pressure: 7 kg/cm2 for PP Sensor with ABS fittings and    12 Kg/cm2 for SS Sensor with SS fitting.
• Display   : 16 X 2 alpha-numeric LCD display with Backlight
• Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)
• Field selectable Units : M3/Hr., LPH, LPM, LPS, GPMUS, and GPMUK
• Supply : 230 V AC +/- 15%, 50 H
• T Fitting  : It is compulsory with PP or, SS 316 Flow Sensors  (Selection from TYPE OF T-FITTINGS)
  

Line Size Selection (Water) : Min. & Max. Flow Rates

Note :To receive quick response, please provide your basic requirement details and max.Application information.